Using our fully equipped workshop, we cover virtually all aspects of bicycle repair & maintenance, from a clean, lube & tune up, to full strip down & rebuilds.
We can replace steerer tubes professionally & safely using CE approved quality ND Tuned components that are compatible with most brands, we can also supply genuine Fox or Rockshox steerers, just ask for a quote.
They are available in alloy & carbon flavours for XC, Enduro & Downhill forks.
We can also retro fit straight steerers to tapered forks for anyone fitting new forks onto old frame sets Mountain bike repair bicycle repair & maintenance bicycle mechanics
We can supply everything you need for your bespoke build, rims, spokes, nipples, hubs & tyres from manufacturers such as DT Swiss, Hope, e-thirteen, Mavic, Industry 9, Stans, Spank & more.
Prices start at $75 per wheel plus parts.
If you are unfortunate enough to have damaged the stanchion on your forks, we can replace them individually, we can supply after market ND tuned branded stanchions or original Fox & Rockshox stanchions.
Just ask for a quote.
We have the Hope Tech master kit, this is necessary for the professional installation & maintenance of all Hope Tech components from hub & bottom bracket bearings to full brake rebuilds & servicing, we can also supply all the required spare parts.
Burnishing the guide bushes in mountain bike fork lowers is a process that improves the smoothness and performance of the fork.
It is a finishing process where a smooth, hard tool is rubbed on the surface of a material to polish it and improve its surface finish and hardness. In the context of bike fork bushings, it’s used to smooth out the bushing surfaces for better fork stanchion movement, the process also ensure the bushes are round & corrects any ovality.
Firstly, we examine the condition of the fork, checking to see how smooth the interface between the stanchion & the guide bushes is, we then take a measurement of the stanchion diameter & take a measurement of the bushs to see what clearance we have & check for ovalistion. Based on these results we can determine if action is required & select the appropriate sized tool to complete the job.
Using a hydraulic press, we push athe burnishing tool down the fork lowers to ensure smooth, even contact This method will apply consistent pressure and ensure uniform burnishing.
The tool is then wound out in reverse mechanically.
Please ask for a quote stating the make, model & year of you fork for a burnishing quote.
Offering a mobile/collect/return service up to 10km radius of Albany Creek 4035 Brisbane, or you are welcome to drop your bike in for us to take a look at.
phone: 0416 798873 email: info@highlinecycles.com.au Take a look on our Facebook page for recent work & updates! www.facebook.com/highlinecycles
Bicycle Service Packages
Brakes and gears adjusted, cable checked.
Hubs, spokes and rims checked.
Tyres checked for pressure and sidewall damage.
Bolts checked.
Drivetrain checked for wear and lubricated.
Headset checked for play and adjusted accordingly.
Suspension checked out & set up if required.
Safety Tested.
Bicycle cleaned down.
Brakes & gears checked & adjusted accordingly.
Drivetrain checked for wear & lubricated.
Tyres inflated & checked for damage.
Hubs, spokes & rims checked & adjusted accordingly.
All bolts checked & torqued.
Headset checked & adjusted if required.
Suspension set up & linkages checked (if applicable).
Safety tested. hope brake service hope hub service hope bottom bracket service
Bicycle cleaned down & frame stripped,
Brakes & gears checked & adjusted.
Drivetrain checked for wear & lubricated.
Tyres inflated & checked for damage.
Hubs, spokes & rims checked & adjusted.
All bolts checked & torqued.
Headset checked & adjusted if required.
Suspension set up (if applicable).
All parts cleaned,de-contaminated, re-greased & re-installed.
New gear cables inner.
New brakes cables inner, oil replaced & system bled if hydraulic.
Braking surfaces, pads, rotors all checked & aligned.
Removal of cranks & replacement of bearings and/or bottom bracket itself. Bearings & parts can be supplied if required.
Removal & replacement of pivot bearings for dual suspension mountain bike, starting at $25 for 2 bearings, we also supply quality bearings for your bike if required.
Servicing of dropper seatposts, majority of brands covered eg Rockshox, Fox, KS.
Hydraulic brakes bled, includes mineral or regular brake fluids as required. We can also replace hoses, shorten them, fault find & supply parts & new brake pads. All models covered from: Hope Tech range, Shimano Saint, XTR XT, SLX, Deore Magura, Tektro, SRAM, AVID, TRT, Hayes
Bottom bracket faced, reamed, threads tapped or chased.
Head tube reamed & faced.
Have an idea for a project? Let us know & we can help supply & assemble all the parts for you.
Removal of fork lower, clean, inspect, new wiper seals & change of fluids.
Rear air shock basic service & checkup replacement of seals & fluids.
Suspension damping servicing, we are currently building up tooling & experience in this area, let us know what issues you may be having & the make/model & we’ll see if we can accommodate.
Custom wheel builds, swap overs or re-spoking services.
Removal & replacement of pivot bearings for dual suspension mountain bike, starting at $25 for 2 bearings, we also supply quality bearings for your bike if required.
We have all the necessary tools & equipment for frame preparation, such as reaming, tapping & facing of the bottom bracket shell & headtube.
Accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
Highline Cycles ABN: 17903868026
Copyright © 2024 Highline Cycles - All Rights Reserved.
Powered by GoDaddy Website Builder